C2 (1963-1967)
Showing 1–20 of 76 results
-
MORE INFO’63-’67 Headlight Bucket Block Off (used to eliminate headlight bucket)
$350.00Our headlight bucket eliminator were specifically design to block-off and eliminate the factory headlight door openings. They are meant to be bonded into place and body worked to the opening. They are commonly used in race applications and for the customers that place their headlights in the grill opening.
These parts will save you time and will give you a higher quality finish.
-
MORE INFO’63-’67 L88 Hood – Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00
Note: Carbon Fiber outer skin only. And for these hoods, only the center section of the carbon fiber top is exposed (see red outline in picture above- hood pictured above is not the hood in this listing, it’s used for demonstrative purposes).
Also available in Fiberglass
L88 Style hood with our signature finished backside 1963 – 1967
Mounting Points For 1963 – 1967 Hood Latches
Our Hoods Are Purposely Designed Slightly Over Sized For Ease Of Fitting
Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Carbon Fiber Outer Skin Only
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO’67 Stinger XL Hood
$1,200.00Our 67 Stinger XL hood has a smooth finish on both sides, not to be confused with press molded. This hood will come with a class “A” finish on both sides with the factory hardware built into the hood for mounting.
Also available in Carbon Fiber
Your hood will come in a hand built crate to ensure a safe delivery. It will weigh 90-125 lbs and have handles on each side. This will likely require 2 people to move. When contacting us for a freight quote please keep in mind the freight company charges considerable more for a residential addresses and lift gates. Unfortunately, we have no choice but to pass that fee to our customers. If you require a residential drop off and or lift gate please let us know so you can avoid additional charges.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO
’67 Stinger XL Hood – Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00Note: Carbon Fiber outer skin only. And for these hoods, only the center section of the carbon fiber top is exposed (see red outline in picture above- hood pictured above is not the hood in this listing, it’s used for demonstrative purposes).
Our 67 Stinger XL hood has a smooth finish on both sides, not to be confused with press molded. This hood will come with a class “A” finish on both sides with the factory hardware built into the hood for mounting.
Carbon Fiber parts have to be clear coated with a high ultra violet blocking (UVB) clearcoat.Carbon Fiber Outer Skin OnlyAlso available in Fiberglass
Note: The pictures of this hood are our Fiberglass version, however the dimensions are exactly the same.
Your hood will come in a hand built crate to ensure a safe delivery. It will weigh 90-125 lbs and have handles on each side. This will likely require 2 people to move. When contacting us for a freight quote please keep in mind the freight company charges considerable more for a residential addresses and lift gates. Unfortunately, we have no choice but to pass that fee to our customers. If you require a residential drop off and or lift gate please let us know so you can avoid additional charges.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO1963 (Will fit 63-67) Corvette Custom Fiberglass Hood
$1,200.00Also available in Carbon Fiber
Has a smooth finish on both sides, not to be confused with press molded. This hood will come with a class “A” finish on both sides with the hardware built into the hood for mounting.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO
1963 (Will fit 63-67) Corvette Custom Hood- Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00Note: Carbon Fiber outer skin only. And for these hoods, only the center section of the carbon fiber top is exposed (see red outline in picture above-hood pictured above is not the hood in this listing, it’s used for demonstrative purposes).
Note: The pictures here are of our fiberglass version of this product. The dimensions are exactly the same whether you order fiberglass or carbon fiber.
Also available in Fiberglass
Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Carbon Fiber Outer Skin Only
Has a smooth finish on both sides, not to be confused with press molded. This hood will come with a class “A” finish on both sides with the hardware built into the hood for mounting.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO1963 Split Window- Flush Mount Kit 10pcs for 1964-1967
$4,200.00Recreate the iconic ’63 split window on your 1964-1967 Corvette
Kit includes: Front Insert, Rear Insert, Left & Right Rear Glass, Rear Interior Liner, Head Liner and
4 pc Interior Windshield TrimAlso available with Carbon Fiber Head Liner & Rear Liner
-
MORE INFO1963 Split Window- Flush Mount Kit 10pcs for 1964-1967- Carbon Fiber ***CURRENTLY UNAVAILABLE***
$5,100.00Recreate the iconic ’63 split window on your 1964-1967 Corvette
This version features a Carbon Fiber Head Liner & Rear Liner.
Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Kit includes: Front Insert, Rear Insert, Left & Right Rear Glass, Rear Interior Liner, Head Liner and
4 pc Interior Windshield Trim -
MORE INFO1965-1966 Front Fenders 1.5″ Flare w/Bonding Strips
$1,350.00Note: This listing is for 2 fenders, and 2 bonding strips (not the front clip shown in the picture). The pictures show the fender as part of our front clip for demonstration purposes only.
Full Panels Front Of Door To Parking LightBonding Strips Included -
MORE INFO63 + Stinger Hood
$1,200.00Also available in Carbon Fiber
We made a combination of the 63’s “cookie sheets” with the classic Stinger. We downsized them both for a more balanced look. We build the upper and lower in the mold, and bond them while still in the molds for an extremely consistent hood that’s finished on both sides. This hood will come with a class “A” finish on both sides with the factory hardware built into the hood for mounting.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO
63 + Stinger Hood – Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00Note: Carbon Fiber outer skin only. And for these hoods, only the center section of the carbon fiber top is exposed (see red outline in picture above-hood pictured above is not the hood in this listing, it’s used for demonstrative purposes).
Note: The pictures here are of our fiberglass version of this product. The dimensions are exactly the same whether you order fiberglass or carbon fiber.
Also available in Fiberglass
Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Carbon Fiber Outer Skin Only
We made a combination of the 63’s “cookie sheets” with the classic Stinger. We downsized them both for a more balanced look. We build the upper and lower in the mold, and bond them while still in the molds for an extremely consistent hood that’s finished on both sides. This hood will come with a class “A” finish on both sides with the factory hardware built into the hood for mounting.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO63-’64 One Piece Front Clip With 1.5″ Built In Flares
$2,650.00(Headlight Blockoff Buckets Shown In Photo Are Not Included)
Perfect For A Restomod, Or Any Other Custom Corvette Build
Our Custom Front Clip Has 1.5 Inch Flares Already Built Into Them And Comes With The Headlight
Supports And Header Bar Already Installed!
Front Clip Has 1963-1964 Style Fender Vents
We Do Not Offer This Front End With 1965, 1966, Or 1967 Style Fender Vents At This Time
As With Any Fiberglass Part Test Fitting Is Required Prior To Paint
-
MORE INFO63-’67 C2 Fiberglass Heater Box Close-Out Panel (on firewall when using vintage air)
$175.00We have specifically designed this panel to be used when installing a Vintage Air system. Made of high quality fiberglass this close-out panel will give your firewall a more polished professional appearance. Feature here in orange to show better yours will come black and can easily be sanded and painted any color. This may fit other applications however we have not used in in any other applications.
-
MORE INFO63-’67 C2 Side Exhaust Covers
$550.00These covers are a direct fit to any stock 63-67 Corvette and will accommodate the stock exhaust system. The moldings are built in and the covers are 4″ longer to hide the entire exhaust pipe. These covers are also a great addition to a restOmod build and will accommodate up to a 3 1/2″ tip.
Note: Some pictures are of our fiberglass version, some are of our carbon fiber version. The dimensions however are exactly the same.
-
MORE INFO
63-’67 C2 Side Exhaust Covers Carbon Fiber ***CURRENTLY UNAVAILABLE***
$1,100.00Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
These covers are a direct fit to any stock 63-67 Corvette and will accommodate the stock exhaust system. The moldings are built in and the covers are 4″ longer to hide the entire exhaust pipe. These covers are also a great addition to a restOmod build and will accommodate up to a 3 1/2″ tip.
**Note** The cover shown in the images for this listing are made out of fiberglass. The fiberglass and carbon fiber versions share the exact same dimensions.
-
MORE INFO63-’67 C2 Stinger Corvette Hood
$1,200.00Our 67 “Stinger” hood has a smooth finish on both sides, not to be confused with press molded. This hood will come with a class “A” finish on both sides with the factory hardware built into the hood for mounting. It will also come with the reinforcement for the stinger bezel which is optional to use, bezel not included. The hood prop location for this hood is on the driver’s side, you may be required to move your prop location to use this hood.
Also available in Carbon Fiber
Your hood will come in a hand built crate to ensure a safe delivery. It will weigh 90-125 lbs and have handles on each side. This will likely require 2 people to move. When contacting us for a freight quote please keep in mind the freight company charges considerable more for a residential addresses and lift gates. Unfortunately, we have no choice but to pass that fee to our customers. If you require a residential drop off and or lift gate please let us know so you can avoid additional charges.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO63-’67 C2 Stinger Corvette Hood-Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00Note: Carbon Fiber outer skin only. And for these hoods, only the center section of the carbon fiber top is exposed (see red outline in picture above-hood pictured above is not the hood in this listing, it’s used for demonstrative purposes).
Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.Carbon Fiber Outer Skin OnlyOur parts make any Street Rod, Restomod, Pro Street, Classic or Custom Corvette stand out from the crowd!Note: Currently, we only have pictures of this hood immediately after it was taken out of the mold. Here’s a link to another Carbon Fiber hood of ours after it is finished.Also available in FiberglassRacer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
