Carbon Fiber
Showing 1–20 of 28 results
-
MORE INFO’63-’67 L88 Hood – Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00
Note: Carbon Fiber outer skin only. And for these hoods, only the center section of the carbon fiber top is exposed (see red outline in picture above- hood pictured above is not the hood in this listing, it’s used for demonstrative purposes).
Also available in Fiberglass
L88 Style hood with our signature finished backside 1963 – 1967
Mounting Points For 1963 – 1967 Hood Latches
Our Hoods Are Purposely Designed Slightly Over Sized For Ease Of Fitting
Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Carbon Fiber Outer Skin Only
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO’67 Stinger XL Hood – Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00Note: Carbon Fiber outer skin only. And for these hoods, only the center section of the carbon fiber top is exposed (see red outline in picture above- hood pictured above is not the hood in this listing, it’s used for demonstrative purposes).
Our 67 Stinger XL hood has a smooth finish on both sides, not to be confused with press molded. This hood will come with a class “A” finish on both sides with the factory hardware built into the hood for mounting.
Carbon Fiber parts have to be clear coated with a high ultra violet blocking (UVB) clearcoat.Carbon Fiber Outer Skin OnlyAlso available in Fiberglass
Note: The pictures of this hood are our Fiberglass version, however the dimensions are exactly the same.
Your hood will come in a hand built crate to ensure a safe delivery. It will weigh 90-125 lbs and have handles on each side. This will likely require 2 people to move. When contacting us for a freight quote please keep in mind the freight company charges considerable more for a residential addresses and lift gates. Unfortunately, we have no choice but to pass that fee to our customers. If you require a residential drop off and or lift gate please let us know so you can avoid additional charges.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO’68-’76 Ignition Cover – Carbon Fiber (will not work with HEI distributor) ***CURRENTLY UNAVAILABLE***
$700.00Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Note: The pictures here are of our fiberglass version of this product. The dimensions are exactly the same whether you order fiberglass or carbon fiber.
Also available in Fiberglass
-
MORE INFO1956-1957 Hood- Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Carbon Fiber Outer Skin Only
Eliminated factory latches and made inside uniform for a clean look.
Removed bracing. Inner framework is all one piece.
Hood has a smooth finish on both sides, not to be confused with press molded. This hood will come with a class “A” finish on both sides with the hardware built into the hood for mounting.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO1959-1962 Custom Hood- Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Carbon Fiber Outer Skin Only
Note: The pictures here are of our fiberglass version of this product. The dimensions are exactly the same whether you order fiberglass or carbon fiber.
Eliminated factory latches and made inside uniform for a clean look.
Removed bracing. Inner framework is all one piece.
This hood is designed for use with a linear actuator. This allows hood to be opened and closed with a motor. Requires linear actuators with bumper stops or hood pins.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO1963 (Will fit 63-67) Corvette Custom Hood- Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00Note: Carbon Fiber outer skin only. And for these hoods, only the center section of the carbon fiber top is exposed (see red outline in picture above-hood pictured above is not the hood in this listing, it’s used for demonstrative purposes).
Note: The pictures here are of our fiberglass version of this product. The dimensions are exactly the same whether you order fiberglass or carbon fiber.
Also available in Fiberglass
Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Carbon Fiber Outer Skin Only
Has a smooth finish on both sides, not to be confused with press molded. This hood will come with a class “A” finish on both sides with the hardware built into the hood for mounting.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO1963 Split Window- Flush Mount Kit 10pcs for 1964-1967- Carbon Fiber ***CURRENTLY UNAVAILABLE***
$5,100.00Recreate the iconic ’63 split window on your 1964-1967 Corvette
This version features a Carbon Fiber Head Liner & Rear Liner.
Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Kit includes: Front Insert, Rear Insert, Left & Right Rear Glass, Rear Interior Liner, Head Liner and
4 pc Interior Windshield Trim -
MORE INFO63 + Stinger Hood – Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00Note: Carbon Fiber outer skin only. And for these hoods, only the center section of the carbon fiber top is exposed (see red outline in picture above-hood pictured above is not the hood in this listing, it’s used for demonstrative purposes).
Note: The pictures here are of our fiberglass version of this product. The dimensions are exactly the same whether you order fiberglass or carbon fiber.
Also available in Fiberglass
Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Carbon Fiber Outer Skin Only
We made a combination of the 63’s “cookie sheets” with the classic Stinger. We downsized them both for a more balanced look. We build the upper and lower in the mold, and bond them while still in the molds for an extremely consistent hood that’s finished on both sides. This hood will come with a class “A” finish on both sides with the factory hardware built into the hood for mounting.
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO63-’67 C2 Side Exhaust Covers Carbon Fiber ***CURRENTLY UNAVAILABLE***
$1,100.00Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
These covers are a direct fit to any stock 63-67 Corvette and will accommodate the stock exhaust system. The moldings are built in and the covers are 4″ longer to hide the entire exhaust pipe. These covers are also a great addition to a restOmod build and will accommodate up to a 3 1/2″ tip.
**Note** The cover shown in the images for this listing are made out of fiberglass. The fiberglass and carbon fiber versions share the exact same dimensions.
-
MORE INFO63-’67 C2 Stinger Corvette Hood-Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00Note: Carbon Fiber outer skin only. And for these hoods, only the center section of the carbon fiber top is exposed (see red outline in picture above-hood pictured above is not the hood in this listing, it’s used for demonstrative purposes).
Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.Carbon Fiber Outer Skin OnlyOur parts make any Street Rod, Restomod, Pro Street, Classic or Custom Corvette stand out from the crowd!Note: Currently, we only have pictures of this hood immediately after it was taken out of the mold. Here’s a link to another Carbon Fiber hood of ours after it is finished.Also available in FiberglassRacer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
-
MORE INFO63-’67 Carbon Fiber Rear Bumpers Includes Hardware ***CURRENTLY UNAVAILABLE***
$2,200.00Note: Some of the images here are of our fiberglass version of the product. However, the dimensions are exactly the same.
Carbon Fiber parts have to be clear coated with a high ultra violet blocking (UVB) clearcoat.
Also available in Fiberglass
Our bumpers are designed to be tucked in tight to the body and are over-sized to look more proportioned. With factory mounting locations these bumpers will bolt directly on your original or restomod. They will fit factory quarters or our wide body rear quarters with 1.5″ flares. They may also fit other quarters, we just have not proven it to ourselves yet. You will get 2 rear bumpers and the required mounting bolts. As with any fiberglass part you will need to test fit and bodywork these bumpers for a perfect fit.
These bumpers can then be painted, powder coated or chrome dipped.
-
MORE INFO68-’72 Lower Splitter CARBON FIBER ***CURRENTLY UNAVAILABLE***
$600.00Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
This lower splitter was designed to bolt directly to the custom L88 front clip we designed and manufacture. It may work in other applications however, we have not proven it ourselves yet.
-
MORE INFO68-’73 C3 Carbon Fiber Rear Bumper (W/Fang) – Pair – Includes Hardware ***CURRENTLY UNAVAILABLE***
$2,200.00Note: The images here are of our fiberglass version of the product. However, the dimensions are exactly the same.
Also available in Fiberglass
Carbon Fiber parts have to be clear coated with a high ultra violet blocking (UVB) clearcoat.
Our fiberglass bumpers are tucked in tight to the body and are over sized to be more proportioned to the body. They will come with attaching hardware and will bolt on in the factory locations. These bumpers will fit factory rear quarters or our 1.5″ flared quarters. The bumpers will require body working for a perfect fit and can be painted, powder coated, vinyl or chrome dipped.
Eliminating almost 14 lbs of weight, these bumpers can be painted, vinyl wrapped or even chrome plated
For These Rear Bumpers You Will Also Need Our Rear Valance For A Perfect Fit
-
MORE INFOC2 Carbon Fiber Front Bumper- Pair- Includes Hardware ***CURRENTLY UNAVAILABLE***
$2,200.00Note: The images here are of our fiberglass version of the product. However, the dimensions are exactly the same.
Our fiberglass bumpers are tucked in tight to the body and are over sized to be more proportioned to the body. They will come with attaching hardware and will bolt on in the factory locations.
Carbon Fiber parts have to be clear coated with a high ultra violet blocking (UVB) clearcoat.
Saving weight, these bumpers will require body working for a perfect fit and can be painted, powder coated, vinyl or chrome dipped.
-
MORE INFOC2 Front Spoiler- Carbon Fiber ***CURRENTLY UNAVAILABLE***
$700.00Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
(Shown here in fiberglass, the design and dimensions are exactly the same)
Front Spoiler Will Require Notching For Use
With Original Front Bumper Brackets -
MORE INFO
C2 Grill Molding- Carbon Fiber ***CURRENTLY UNAVAILABLE***
$700.00Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
(Some photos are of the fiberglass version of this product, the design and dimensions are exactly the same)
Also Available In Fiberglass
-
MORE INFOC2 Rocker Panels-Carbon Fiber ***CURRENTLY UNAVAILABLE***
$1,300.00Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Half inch wider to help hide the frame. Epoxy the included fasteners to the back of this panel for a seamless and easy install!
Also available in Fiberglass
-
MORE INFOC3 Carbon Fiber Rear Bumpers Fangless- Pair- ’68-’73 Includes Hardware ***CURRENTLY UNAVAILABLE***
$2,200.00Note: The images here are of our fiberglass version of the product. However, the dimensions are exactly the same.
Carbon Fiber parts have to be clear coated with a high ultra violet blocking (UVB) clearcoat.
Our rear bumpers are tucked in tight to the body and are over sized to be more proportioned to the body. They will come with attaching hardware and will bolt on in the factory locations. These bumpers will fit factory rear quarters or our 1.5” flared quarters. The bumpers will require body working for a perfect fit and can be painted, powder coated, vinyl or chrome dipped.
Also available in Fiberglass
-
MORE INFOC3-LS Big Block Long Hood- Carbon Fiber ***CURRENTLY UNAVAILABLE***
$2,400.00Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Carbon Fiber Outer Skin Only
Long hood. From 68-72, this eliminates your wiper door. To use this hood, you need a 78-82 windshield.
For 68-72, you will also need to change your fender caps.
For 77-82 Hood Support Recommended
Also available in Fiberglass
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.
- 1
- 2