C3 (1968-1982)
Showing 1–20 of 66 results
![]()
MORE INFO68-’72 Bumper Set – Includes Hardware
$1,225.00Includes: Front Bumper, Grill Moldings, Bumperettes/Bumper Guards
They are a direct fit bumper and bolt on with factory hardware. Bumpers are tucked in tight to the body and can be painted, wrapped or chrome dipped. Our 5 piece bumper package will reduce a minimum of 6 pounds of weight for you race car guys out there.
Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFOBody Mount #4 Repair Pocket
$75.00When the #4 steel mount on Convertibles sometimes deteriorates
it eats up the fiberglass. This is a fiberglass pocket to install in its place.
Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFOBumperettes / Bumper Guards – ’68-’72
$375.00These will NOT work on an original 68-72. Compatible only with our Custom Front Clip
Fits perfectly with our
Wide Body Front Clip
Front Bumper
Grill Molding
Made of high quality fiberglass materials. Easily sand and paint, wrap, or chrome dip. You will receive 1 pair. These bumperettes were designed to attach to our fiberglass front bumper. They will not be a direct bolt on if you are using an original chrome bumper. They may work in other applications or with other aftermarket front bumpers however, we have not proven it. Please contact us if you have any questions prior to ordering.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFOClutch Cylinder Bracket (Wilwood)
$150.00Mount for installing a hydraulic clutch master cylinderCheck out the “You May Also Like…” Section below for hand picked recommendations to go with this item.Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFODeluxe Interior Trim Kit – ‘68-’77
$6,050.00Our Complete C3 Interior Package Is Finally Here!
Fiberglass panels to give your C3 a more polished look.
Includes: Roof Panels, T-Top Bar, Quarter Trim, and Rear Lower Window Trim
Upper Dash, LH Lower Dash (Will require Dakota Digital 47-53 Chevy/GMC Pickup Gauges)
Steering Column Cover, RH Lover Dash (Will Require Aftermarket A/C), Center Console, Door Panels, Center Section From Upper Dash To Center Column
•This Kit Eliminates The Center Gauge Cluster
(Note: Some pictures for this listing show parts after they have been prepped and painted)
Standard Trim Kit Also Available
Check out the “You May Also Like…” Section below for that and other hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFODoor Actuator Brackets
$150.00This bracket was made to hold an Electric-Life door actuator. It may work with other brands, but we have not tested them yet.
Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFODoor Panels (Pair) – Accommodates 6″ Speaker- ’68-’77
$1,200.00Note: This door panel is made to accommodate a 6′ speaker. No speakers are included with these panels.
Also Available in Carbon FiberCheck out the “You May Also Like…” Section below for that, and other hand picked recommendations to go with this item.Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFODoor Panels (Pair) – Accommodates 6″ Speaker- ’68-’77 – Carbon Fiber
$2,425.00Note: This door panel is made to accommodate a 6′ speaker. No speakers are included with these panels.
Also available in Fiberglass
Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFODoor Skins (Pair) With Handle & Door Lock Delete
$1,000.00Also available in Carbon Fiber
No handles or locks. Used for slicking out door panel.
This is a high quality, hand laid part. Made in our shop in Saginaw, MI.
We make every part with high grade vinyl ester tooling resin. It is a hybrid of polyester and epoxy resin.
If the pros use that resin for tooling, imagine how strong it is for parts.
We make full panels to assure a part that won’t shrink and lasts.
Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFODoor Skins (Pair) With Handle & Door Lock Delete – Carbon Fiber
$2,000.00Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
No handles or locks. Used for slicking out door panel.
Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFOEngine Bay Block-Off Kit
$1,375.00Slick out your engine compartment and wheel wells with our Engine Bay Block-off Kit.
Kit Includes: Inner Fenders, Extensions, Wiper Motor Cover, and Firewall
Just need the firewall? Check that out, along with other hand picked recommendations at the “You May Also Like…” Section below!
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFOFender Caps -’68-’72
$375.00If you’re looking to delete your wiper door assembly on your 68-72 and you want to replace the hood with a long style hood, to do it right you’ll want to change the fender caps so the hood lines up properly
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
Interested in our C3 L88XL Hood or C3 LS Big Block Long Hood? If you’re going to use one of those hoods on a ’68-’82 Corvette, check out the instructions below for required modifications
![]()
MORE INFOFirewall Block Off With Wiper Motor Cover (For ’68-’76)
$375.00These parts are also available as part of a C3 Engine Bay Block Off Kit
(Kit Includes: Inner Fenders, Extensions, Wiper Motor Cover, and Firewall)
Slick out your firewall for a more polished engine compartment
while saving tons of body work hours.
This panel and wiper motor cover door were designed for use with Vintage Air System and a Detroit Speed wiper motor.
Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFOFront Bumper – ’68-’72
$600.00Fits perfectly with our
Wide Body Front Clip
Grill Molding
Bumperettes / Bumper Guards
Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFOFront Clip – ’68-’69 – Wide Body 3″ Flares
$2,925.00Fits perfectly with our
Front Bumper
Grill Molding
Bumperettes / Bumper Guards
C3 Corvette Wide Body L88 Flares Front Clip
This wide body front clip has 68-69 specific side fender louvers and marker lights. It will fit any C3 if you know what your doing. The front flares will add 3″ of width to the body and the wheel opening are perfectly proportioned from side to side.
We also carry 2 different styles of C3 rear clips as well as just the fenders and rear quarters which are full panels and bond to the factory bonding strips
Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFOFront Valance
$375.00Will not work with original fenders.Made for use with our ’68-’69 L88 Style with 3″ Flares C3 Front Clip, or Fenders.Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFOGrill Moldings – ’68-’72
$250.00Fits perfectly with our
Wide Body Front Clip
Front Bumper
Bumperettes / Bumper Guards
Sold with attaching hardware and instructions
Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
![]()
MORE INFOHeater Block Off Panel
$200.00On Firewall when using vintage air
We have specifically designed this panel to be used when installing a Vintage Air system. Made of high quality fiberglass this close-out panel will give your firewall a more polished professional appearance. Easily be sanded and painted any color. This may fit other applications however we have not used in in any other applications.
Check out the “You May Also Like…” Section below for hand picked recommendations to go with this item.
Keep scrolling down for more info. Scroll to the bottom of the page for general instruction videos.
