Showing 1–20 of 41 results
Clutch Cylinder Bracket (Wilwood)$125.00Mount for installing a hydraulic clutch master cylinderDynamic CorvettesLocated in Saginaw Michigan since 1983, we are family owned and operated specializing in only CorvettesOur fiberglass parts are manufactured in house and only sold by usAll parts are made of high quality Vinyl Ester Resin and Chop Strand Mat and come out of the mold with a Class A finishWe go to great lengths to build a high quality part. We test fit to a minimum of 3 never wrecked Corvettes then we take the average of the 3 to tool from.It is imperative to remember we are working with 40 plus year old vehicles and back then the GM quality specs varied greatly to today’s standards.Better to purchase one of our parts or else with our competitors you will have to bodywork everything.You will not be able to scuff and paint. Test fitting is required prior to bodywork as well as throughout the bodywork process.The likelihood of having to bodywork adjacent panels for the proper fit is very high and it is recommended a qualified Corvette Specialist install these parts.Returned parts are subject to a 25% restocking fee plus return freight. Altered parts are non-returnable.
Deluxe Interior Trim Kit – ‘68-’77$5,500.00
Our Complete C3 Interior Package Is Finally Here!
Fiberglass panels to give your C3 a more polished look.
Includes: Roof Panels, T-Top Bar, Quarter Trim, and Rear Lower Window Trim
Upper Dash, LH Lower Dash (Will require Dakota Digital 47-53 Chevy/GMC Pickup Gauges)
Steering Column Cover, RH Lover Dash (Will Require Aftermarket A/C), Door Panels
Center Section From Upper Dash To Center Column
•This Kit Eliminates The Center Gauge Cluster
(Note: Some pictures for this listing show parts after they have been prepped and painted)
Door Skins (Pair) With Handle & Door Lock Delete$900.00
Also available in Carbon Fiber
No handles or locks. Used for slicking out door panel.
This is a high quality, hand laid part. Made in our shop in Saginaw, MI.
We make every part with high grade vinyl ester tooling resin. It is a hybrid of polyester and epoxy resin.
If the pros use that resin for tooling, imagine how strong it is for parts.
We make full panels to assure a part that won’t shrink and lasts.
Firewall Block Off With Wiper Motor Cover (For ’68-’76)$350.00
These parts are also available as part of a C3 Engine Bay Block Off Kit
(Kit Includes: Inner Fenders, Extensions, Wiper Motor Cover, and Firewall)
Slick out your firewall for a more polished engine compartment
while saving tons of body work hours.
This panel and wiper motor cover door were designed for use with Vintage Air System
and a Detroit Speed wiper motor.
Heater Block Off Panel$175.00
On Firewall when using vintage air
We have specifically designed this panel to be used when installing a Vintage Air system. Made of high quality fiberglass this close-out panel will give your firewall a more polished professional appearance. Easily be sanded and painted any color. This may fit other applications however we have not used in in any other applications.
Holley Sniper to Stock Air Cleaner Base – C1-C2-C3 Models$125.00
Compatible with Holley Sniper Part # 550-511, 550-510 and 550-516)
Use our air cleaner base with Holly Sniper to keep the original air cleaner.
Requires modification to fit your vehicle. Cut out to original airbase, Bond it, Bodywork our piece to your specs, Paint it.
Perfect for racers, we can make just about any hood as just a hood skin. This will be significantly lighter!
Price is half of the original price for whatever hood you’re interested in.Product Dimensions (Fiberglass)(Rounded up)Height: 7 in.Length: 66 in.Width: 46 in.Weight: 14 lb.
Ignition Cover – ’68-’76 (Will Not Work With HEI distributor) – Carbon Fiber$700.00
Carbon Fiber parts have to be clear coated with a high ultra-violet blocking (UVB) clearcoat.
Note: The pictures here are of our fiberglass version of this product. The dimensions are exactly the same whether you order fiberglass or carbon fiber.
Also available in Fiberglass
L88 Xl Hood- 3 Inches Higher Than Stock L88!$1,200.00
Also available in Carbon Fiber
3 inches higher than a stock L88 hood!
Has a smooth finish on both sides, not to be confused with press molded. This hood will come with a class “A” finish on both sides with the hardware built into the hood for mounting.
(Specify Year) 68-72 Fender Cap Mods Required
77-82 Hood Support Recommended
Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for
Fiberglass – $600
Carbon Fiber- $1,200
Click HERE to see that product listing.