FORGOT YOUR DETAILS?

Hood – 1967 Stinger XL – Carbon Fiber

$2,650.00

Note: Carbon Fiber outer skin only. And for these hoods, only the center section of the carbon fiber top is exposed (see red outline in picture above- hood pictured above is not the hood in this listing, it’s used for demonstrative purposes).

Our 67 Stinger XL hood has a smooth finish on both sides, not to be confused with press molded. This hood will come with a class “A” finish on both sides with the factory hardware built into the hood for mounting. 

Carbon Fiber parts have to be clear coated with a high ultra violet blocking (UVB) clearcoat. 
 
Carbon Fiber Outer Skin Only

Also available in Fiberglass

Note: The pictures of this hood are our Fiberglass version, however the dimensions are exactly the same. 

Your hood will come in a hand built crate to ensure a safe delivery. It will weigh 90-125 lbs and have handles on each side. This will likely require 2 people to move. When contacting us for a freight quote please keep in mind the freight company charges considerable more for a residential addresses and lift gates. Unfortunately, we have no choice but to pass that fee to our customers. If you require a residential drop off and or lift gate please let us know so you can avoid additional charges.

Racer? Need the absolute lightest hood possible?? We can make this hood as just a hood skin for 

Fiberglass – $600

Carbon Fiber- $1,200

Check out the Hood Skin product listing, and Fiberglass hood along with other hand picked recommendations for this product at the  “You May Also Like…” section below! 

Part Number: C2-293 Categories: , , Tags: , , , , ,

Description

Also Available In Fiberglass

Note: The pictures of this hood are our Fiberglass version, however the dimensions are exactly the same.

Note: The hood in this video is NOT the same hood as this product listing. However, the process for making it (finished on each side, etc) is the same for ALL of our hoods.

Our 67 Stinger XL hood has a smooth finish on both sides, not to be confused with press molded. This hood will come with a class “A” finish on both sides with the factory hardware built into the hood for mounting.

Your hood will come in a hand built crate to ensure a safe delivery. It will weigh 90-125 lbs and have handles on each side. This will likely require 2 people to move. When contacting us for a freight quote please keep in mind the freight company charges considerable more for a residential addresses and lift gates. Unfortunately, we have no choice but to pass that fee to our customers. If you require a residential drop off and or lift gate please let us know so you can avoid additional charges.

If you would like to purchase, please call us at 989-249-1100 or click “Product Inquiry”

Dynamic Corvettes

Located in Saginaw Michigan since 1983, we are family owned 

and operated specializing in only Corvettes

Our fiberglass parts are manufactured in house and only sold by us

All parts are made of high quality Vinyl Ester Resin and Chop Strand Mat

and come out of the mold with a Class A finish

We go to great lengths to build a high quality part. We test fit to a minimum of 3 never wrecked Corvettes then we take the average of the 3 to tool from.

 It is imperative to remember we are working with 40 plus year old vehicles and back then the GM quality specs varied greatly to today’s standards.

Better to purchase one of our parts or else with our 

competitors you will have to bodywork everything.

You will not be able to scuff and paint. Test fitting is required prior to bodywork as well as throughout the bodywork process.

The likelihood of having to bodywork adjacent panels for the proper fit is very high and it is recommended a qualified Corvette Specialist install these parts.

Returned parts are subject to a 25% restocking fee plus return freight. Altered parts are non-returnable.

Additional information

Year

, , , ,

You may also like…

TOP